|
Post by MikeB on Jul 26, 2012 10:34:56 GMT -5
Items used Bill Jorgensen 2003 G-Force Parts from both a AMT 88 Penske and a Revell Reynard Custom decals Tamiya Sprays This is the goal More later ;D MB
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 26, 2012 11:53:17 GMT -5
Hot Dog! I have this kit and this WIP is just what I need. Thanks Mike.
John
|
|
|
Post by MikeB on Oct 8, 2012 18:53:33 GMT -5
OK I'm going to start by modifying the AMT front suspension starting with the upper a arms Start by removing the steering arm this will be replaced with a thicker one later Here is how it should look after I also inserted a pin to help attache it to the body Before and after The lower a arms need no modifications just insert pins into the end Blurry shot of them pined to the body The rear requires a little more work but not that much on the left is the upper Penske part and the lower is on the right for this build we need to reverse that the G-Force will use the lower as the upper and the upper as the lower ;D confused yet ;D Here is the Penske part and the white metal one from one of Bill's kits this is what we want to replicate Another shot of the two We will start by cutting away most of the kit part we will only be using the top part of it After the cuts will will only be using the part on the right Isn't it cute? After some more trimming cut a piece of .060 rod and drill a hole on one end to insert a metal pin drill another hole the Penske part After that drys cut another piece of rod and glue it to the part like this cut the rod a little longed then needed so you can adjust the fit to the body The new part and the white metal part not a 100% match but not too shabby ether on the upper again I used the white metal part as a guide The new part and the white metal part The new parts and the white metal parts The new parts just need some putty and finish sanding to knock down some of the roundness and then they are ready for primer Also big thanks to both Bill Jorgensen and Michael@indycals for their help with this project More later MB
|
|
|
Post by MikeB on Jan 24, 2013 15:56:06 GMT -5
Just a small update today Made the rear and front wing endplates and the rear wing support nothing major
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 28, 2013 7:13:58 GMT -5
What ever happened to this project? I'm not trying to be a pest, but I really enjoy your WIPs.
John
|
|
|
Post by MikeB on Mar 28, 2013 7:16:39 GMT -5
It's going to be painted this weekend with the 91
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 28, 2013 15:12:52 GMT -5
Can't wait to see them both finished.
|
|
|
Post by MikeB on Mar 28, 2013 15:17:38 GMT -5
I got the white on it today it came out OK some dust that needs to be sanded off but nothing too major
|
|
|
Post by MikeB on Apr 4, 2013 13:16:09 GMT -5
Tamiya Pure White is on and really it was looking good But then I sprayed the Flou Red the same paint I used one the 91 same can same paint and boom the whole thing just cracked so off to the purple pond for now
|
|