|
Post by Dan Belcher on Jun 5, 2017 20:32:20 GMT -5
Here's one I've been working on for several weeks now. Here's a dry fit of the bodywork. I've got a lot of detail work left to do on the driver... These decals are the absolute worst I've ever worked with. They're thick as cardboard, they're as stiff as cardboard too, and they stick to everything except the place you want to put them... The helmet decals are pretty awful, I may need to use some touch up paint just to make them tolerable looking. The tires are looking great though!
|
|
|
Post by illeagle10 on Jun 6, 2017 6:44:46 GMT -5
Looking good Dan!
Jim
|
|
|
Post by dusfincher on Jun 6, 2017 16:01:28 GMT -5
I've done a couple of those old Reynards and the decals are terrible!
|
|
|
Post by jj66 on Jun 7, 2017 4:59:29 GMT -5
Good start! Yes, the tires are fantastic!
|
|
|
Post by shunter on Jun 8, 2017 21:05:52 GMT -5
Looks like a great start.
|
|
|
Post by Dan Belcher on Jun 12, 2017 21:08:43 GMT -5
The eagle beak decals were so, so difficult... Thanks to Jim for the advice he gave me on working with the suspension. I did a test fit of the brass rods into the holes I drilled in the car, and it seems like this will be 1000% easier and stronger than just gluing the bare suspension pieces.
|
|
|
Post by Dan Belcher on Jun 14, 2017 21:43:44 GMT -5
|
|
|
Post by dusfincher on Jun 14, 2017 23:05:52 GMT -5
Looks great! I think about half of the cars I've done don't have all 4 wheels touching either
|
|
|
Post by cfd on Jun 18, 2017 16:12:11 GMT -5
These were great looking cars and it's a great looking model! I like the driver figure too. Great build Dan!
|
|
|
Post by illeagle10 on Jun 19, 2017 17:25:28 GMT -5
Looks great Dan!
Jim
|
|
|
Post by shunter on Jun 23, 2017 4:09:52 GMT -5
Nice work..
|
|
|
Post by jimclarklotus25 on May 13, 2020 15:54:36 GMT -5
Dan, Good afternoon. I'm getting ready to do this Reynard. Whose red and green did you use on this effort. Be safe.
Mark
|
|
|
Post by Dan Belcher on May 14, 2020 7:31:16 GMT -5
Dan, Good afternoon. I'm getting ready to do this Reynard. Whose red and green did you use on this effort. Be safe. Mark Hey Mark, I used Tamiya TS-35 Park Green and TS-8 Italian Red.
|
|
|
Post by jimclarklotus25 on May 14, 2020 14:34:15 GMT -5
That's what I was going to use but I just wanted another opinion. Thanks Dan... be safe.
|
|