Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2013 13:04:29 GMT -5
I just spoke to Gary Doucette and he ask if I would pass along the following info concerning his Oval Track Legends kit of the 1938 Burd Spl- the alum tube section of the front axel is too long, it needs to be shortened to a 1/25 scale length of 30 inches or an actual length of 28mm. Gary said if you don't have any spare tubing laying around he'll send you a replacement piece. Contact him if you have any questions.
Sandy
|
|
|
Post by herk56 on Jan 26, 2013 13:55:59 GMT -5
Thanks for the info, but if you need to shorten it, why would you need another piece?
Brian
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2013 18:36:58 GMT -5
Actually 30" at 1/25 scale = 30.48 mm
Roughly speaking 1 mm = 1" at 1/25
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2013 20:44:18 GMT -5
Michael, you're one step ahead... Gary just called and said the correct length for the alum tube section of the revised axel should be, yes, 30mm !
Sandy
|
|